Pest dog bug Repeller/Animal Repeller
Product Description
ULTRASONIC Animal-Away
This latest PIR and ULTRASONIC Animal-Away provides you a convenient, non-location limited, effective and humane way to deter the cats, dogs, rabbits, squirrels out of you gardens, lawn and yard without harnimg them.
Animal-Away utilizes the sophisticated PIR (Passive Infra Red detecting system) to monitor a fan shaped area of 70 degree arc. and distance up to 30 feet which is appro. 550 square feet of unobstructed space. Intruding creatures will be detected within the protecting area.
Animal-Away will send ultrsound at frequency of about 23,000Hzto deter the intruding creatures once the detecting system is triggered. The utilization of infra red detecting system is applied to save battery energy as Animal-Away is operated by a 9V alkaline battery. With the benefits of battery operation. Animal-Away can be easily installed at any place without electricity. You may mount the Animal-Away to the wall outside of your building, on a ledge or attach it to a post to stand the unit on the ground. Although the unit is weather-resistant, it is recommended to remove the main module from the mounting shelter if storms are expected.
the ultrasonic sound emitted from Animal-Away can not be heard by humans but is uncomfortable to animals, whose only reaction is to quickly move away.
UNWELCOME ANIMALS AFFCETED: Cats Dogs Squirrels Rabbits
APPLICATION:
Indoors requires dog or cat intrusion prevention
Near pond to protect fish
Flower bed
Bird bath / bird house to protect birds
Garden, lawn and yard
HOW TO INSTALL
Remove the main module from the mounting shelter by inserting a thin, blunt blade between the back of the unit and twisting qently. The module will slide out.
Slide open the cover of battery compartment at the back side of the main module, install a new 9V alkaline battery.
Replace the main modele by pushing it into the mounting shelter. Using screw to mount shelter between 30-90 cm from the ground to wall or a post.
Turn the power switch to “ON” position. A built-in red LED indicator inside of the lens will be lit on after the warming up time of 30 seconds approximately to confirm the detection and ultrasound waves emission.
Leave your Animal-Away on for 24 hours.
If the red LED indicator does not light up within the protection zone, it is time to replace battery. To repelace battery, turn the power switch to “OFF” position and repeat steps 1-2 and replace the main module by pushing it into the mounting shelter.
PLEASE NOTE
Turn off the Animal-Away if your pet is playing around the protection area.
When anyone is in the protection area, turn off the device ot preserve the battery life.
Do not immerse the device in water or any other liuid.
Do not modify or tamper with the device’s internal components. Covering or painting over the front speaker can damge the device and cause it to malfunction.
The PIR detecting system goes on and off as the heat-body animal’s movement stop and start.
Mark sure the lens is clear. Do not handle the lens and use damp cloth to wipe the dirt gently. Use no benzine, alcohol or paint thinner.
If use Animal-Away indoors, ensure the cat or dog is able to withdraw.
SOECUFUCATION and PARAMETERS
| Products name | Pest dog bug Repeller |
| Dimension: | 114×88×60mm |
| Weight: | 180 gram (main module + shelter) |
| Power Supply: | 9V (1×9V alkaling battery) |
| Power: Standby current: | 0.16mA |
| Exit delay time for ultrasound: | About 25 seconds |
| Warm up time: | About 30 seconds |
| Frequency: | 23,000Hz appro |
| Protection Coverage: | Fan shaped area of 70 degree distance up to 30 ft. |
Dimension: 114×88×60mm
Weight: 180 gram (main module + shelter)
Power Supply: 9V (1×9V alkaling battery)
Power: Standby current: 0.16mA
Exit delay time for ultrasound: About 25 seconds
Warm up time: About 30 seconds
Frequency: 23,000Hz appro.
Protection Coverage: Fan shaped area of 70 degree distance up to 30 ft.
Product Categories : Pest Repeller System
Premium Related Products
